Sound Active Mode - ADJ WiFly EXR Dotz Par User Instructions

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

WiFly EXR Dotz Par

RGB Dimmer Mode

remain static or adjust the RGB colors to create your desired

color.

1. Follow instructions 1-2 under Built-In Programs.

2. Press the UP or DOWN buttons so that "1. Manual" is dis-

played, and press ENTER.

3. A flashing underscore will appear underneath the first color

adjustment. Use the UP and DOWN buttons to adjust the color

intensity to your liking. Press ENTER to set the color and move

to the next color adjustment.

4. Continue to adjust the colors until you find your desired set-

ting. Press the ENTER button until the underscore is located

under "SXX". "XX" represents the current strobe setting.

Use the UP and DOWN buttons to adjust the strobe speed or

completely turn it off. The "00" setting turns the strobe off, "01"

is the slowest strobe rate, and "99" is the fastest strobe rate.

Press ENTER once you find your desired strobe setting.

Color Macro

- Select your desired color macro to remain

static.

1. Press the MODE button until "MACRO" is displayed. The cur-

rent color macro setting is located underneath.

2. Press the ENTER button and the flashing underscore will

appear under the color macro number. Use the UP and DOWN

buttons to scroll through the 32 color macros until you find your

desired color then press the ENTER button.

NO DMX

- This mode can be used as a precaution mode,

that in case the DMX signal is lost, interrupted, or power is

lost, the operating mode chosen in the setup is the running

mode the fixture will go into when the DMX signal is lost. You

can also set this as the operating mode you would like the

ADJ Products, LLC - www.adj.com - WiFly EXR Dotz Par User Manual Page 12

System Menu

- Select your desired color to

WiFly EXR Dotz Par

unit to return to when power is applied.

1. Press the MODE button until "NO DMX" is displayed. The cur-

rent No DMX setting will appear underneath.

2. Press the ENTER button and a flashing underscore will appear

underneath the current No DMX setting. Use the UP or DOWN

buttons to find an operating mode you would like the unit go into

when the DMX signal is lost.

• Fade - If the DMX signal is lost or interrupted, the unit will auto-

matically go into the fade program.

• Blackout - If the DMX signal is lost or interrupted, the unit will

automatically go into stand by mode.

• Hold - If the DMX signal is lost or interrupted, the fixture will stay

in the last DMX setting.

3. Press ENTER to confirm your desired set up.