Replacing The Rear Bulb Holder (Conventional Lighting Unit) - Invacare Storm4 Series Service Manual

SERVICE MANUAL

8.7.15 Replacing the rear bulb holder (conventional lighting unit)

Requirements:
· Phillips screwdriver size 2
· 8 mm socket spanner
· 13 mm socket spanner
Dismantling the bulbholder:
·
Remove the complete rear light as described in chapter 8.7.13.
·
Undo the two Allen screws (1) with a 4 mm socket spanner and remove the screws.
·
Replace the bulbholder (2).
Refitting the bulbholder:
·
Refit the parts in reverse order.
·
Check all vehicle functions.
96
®
Invacare - STORM
4 ®
Series