Replacing The Headlamp Holder On The Seat Profile (Modulite Seat) - Invacare Storm4 Series Service Manual

SERVICE MANUAL

8.7.11 Replacing the headlamp holder on the seat profile (Modulite seat)

Requirements:
· Phillips screwdriver size 2
· 8 mm spanner
· 6 mm Allen key
Dismantling the headlamp holder:
·
Remove the lamp (1), as described in chapter 8.7.8.
·
Loosen the Allen screw (2) using a 6 mm Allen key.
·
Remove the Allen screw (2), the washer, the lamp holder (3) and the nut (4) from the seat
profil.
Refitting the headlamp holder:
·
Assemble all parts again in reverse order.
·
Tighten the screws hand-tight.
·
Check all vehicle functions.
90
®
Invacare - STORM
4 ®
Series