Replacing The Actuator Module Under The Seat - Invacare Storm4 Series Service Manual

®
Invacare - STORM
·
Pull the plug (1) out of the actuator module.
·
Undo the two Phillips screws (2).
·
Replace the actuator module.
Refitting the tilt module:
·
Refit the parts in reverse order.
·
Plug all the plugs into their old positions.
·
To conclude, check all the mobility aid functions.
8.2.5

Replacing the actuator module under the seat

The actuator module is optional.
Requirements:
· 4 mm Allen key
Dismantling the tilt module:
·
If possible, use the lifter to move the seat to the uppermost position.
·
Carefully note the location of the cable and the connection locations of the various plugs. Either
mark each plug and socket, or take a photograph with a digital camera.
·
Pull the plug (1) out of the actuator module.
·
Remove the two Allen screws (2).
·
Replace the actuator module.
Refitting the tilt module:
·
Refit the parts in reverse order.
·
Plug all the plugs into their old positions.
·
To conclude, check all the mobility aid functions.
4 ®
Series SERVICE MANUAL
53