Replacing The Lighting/Actuator Module Clam - Invacare Storm4 Series Service Manual

SERVICE MANUAL
Refitting the G-Trac sensor:
·
Assemble the parts in reverse order.
·
Reconnect all cable connectors to their former positions.
·
The G-Trac sensor must be installed with the cable pointing upwards. The module has a guide
that must fit exactly into the G-Trac sensor holder.
·
Test all functions of the vehicle.
8.2.8

Replacing the lighting/actuator module CLAM

Requirements:
· Phillips screwdriver size 2
· 3 mm Allen key
· 4 mm Allen key
· 8 mm socket spanner
Dismantling the CLAM:
·
If possible, use the lifter to move the seat to the uppermost position.
·
Switch the electronics OFF on the remote.
·
Remove the seat plate or sling seat (1), see chapter 10.3.3.
·
Remove the cover (2).
·
Pull all plugs (1) out of the lighting/actuator module CLAM.
·
Loosen and remove the relais as described in chapter 8.12.3.
58
®
Invacare - STORM
4 ®
Series