RetroSound Model Two Installation And Owner's Manual page 25

Model Two Owner's Manual
FAD 00
XBAS OFF
SUB OFF
SUB VOL 10
SUB 120H
Copyright 2014 © Retro Manufacturing, LLC
FADER
The fader control allows you to fade
the sound from the front pair of
speakers to the rear pair of speakers.
Adjustment range is 0-12 between
front and rear speakers.
XBAS
This function boosts bass and treble
at low listening volume and should be
turned off at higher volumes. You will
know this function is active when you
see "XBAS" on your display. Adjusting
your Bass, Mid or Treble settings will
override the XBAS function.
SUB ON/OFF
Turn the subwoofer RCA output ON
to activate this feature.
SUB VOL
When SUB ON is selected and a
subwoofer is attached to the unit, use
this function to increase or decrease
the volume level of the subwoofer
outputs from 0-12.
SUB
When SUB ON is selected and a
subwoofer is attached to the unit, use
this function to adjust the subwoofer
crossover point to 80HZ, 120HZ or
160HZ.
Page 23