Making A Call; Receiving A Call; Ending A Call - RetroSound Model Two Installation And Owner's Manual

Making a Call

1. Dial the desired number on the paired mobile phone.
2. Once dialing is in progress, "CALLING" will be displayed on the LCD.
3. When the call is in progress, "TALK" will be displayed on the LCD, along
with the elapsed call time (TALK 00:00).

Receiving a Call

1. If a call comes in, audio playback from the current source will either be
muted or paused (depending on the source) and "PHONE IN" will be shown
on the display, along with the Caller ID, if it is enabled by the phone/carrier.
2. Turn the left rear knob counter-clockwise to accept the call.

Ending a Call

To end the call, turn the left rear knob counter-clockwise to end the call.
NOTE: Regarding placement of the included Bluetooth microphone, we
suggest mounting the microphone on the sun visor, A-pillar or steering column
inside the vehicle, closest to the driver. The microphone is very sensitive and
you may speak at a normal volume when using hands-free operation.
Streaming music from your device
The Model Two radio is capable of wireless music playback using the built in
Bluetooth technology. Once your device is paired with the radio, you may
stream music by selecting your desired playback source on your device and
starting the application (ex: Pandora, Slacker) or by selecting music stored on
your device. Make sure that the Model Two radio is in BT AUDIO mode (See
"Operation Table" on Page 16) to check how to switch to this source mode.
Please note that Bluetooth wireless technology has a maximum range of 30 feet
from the radio. Some devices may allow our radio the ability to skip songs/
tracks/selections via the right front shaft knob.
Page 34
Model Two Owner's Manual
Copyright 2014 © Retro Manufacturing, LLC