RetroSound Model Two Installation And Owner's Manual page 26

BAS 80H
MID 1.0K
TRE 10.0K
Page 24
Model Two Owner's Manual
BAS
Use this function to make a more
detailed boost or cut adjustment of
bass (low) frequencies as follows:
60/80/100/200Hz. This is a very
useful mode for making very specific
tonal adjustments. When select-
ing one of these 60/80/100/200Hz
points, any changes to the prior BAS
menu settings on page 21 (-7 to +7)
will boost or cut at the selected fre-
quency setting chosen in this menu.
MID
Use this function to make a more
detailed boost or cut adjustment
of midrange (vocal) frequencies as
follows: 0.5K/1.0K/1.5K/2.5KHz.
Default setting is 1.0KHz. This is
a very useful mode for making
very specific tonal adjustments.
When selecting one of these
0.5K/1.0K/1.5K/2.5KHz points, any
changes to the prior MID menu set-
tings on page 21 (-7 to +7) will boost
or cut at the selected frequency set-
ting chosen in this menu.
TRE
Use this function to make a de-
tailed boost or cut adjustment
of treble frequencies as follows:
10.0K/12.5K/15.0K/17.5KHz.
Default setting is 10.0KHz.
When selecting one of these
10.0K/12.5K/15.0K/17.5KHz points,
any changes to the prior TRE menu
settings on page 21 (-7 to +7) will
boost or cut at the selected frequen-
cy setting chosen in this menu. This
is a very useful mode for making very
specific tonal adjustments.
Copyright 2014 © Retro Manufacturing, LLC