Pima hunter-pro User Manual page 7

HUNTER-PRO Intruder Alarm System - User Manual
NOTES:
You can program a name for each user code. This user name will appear when
viewing the 'history log.'
!
Short Code: A two-digit code with which you can ONLY arm the
system.
!
Hold-Up Code (Duress Code): This code is ONLY for disarming the
system during a robbery, but is useful ONLY if the system is
connected to a Monitoring Station.
!
Relay Code: Use this code to change the status of the control
panel's internal relay from ON to OFF and vise versa. The relay
can be used for various applications (e.g., opening/closing an
electric gate, opening an electromagnetic door lock, etc.).
NOTES:
The letter R is displayed to the left of the clock when the relay is ON.
The installer programs the time in which the relay is ON.
The relay can also be programmed by the installer to be activated as response to
a zone alarm and/or system failure.
7