Wall Mounting Template - Telstra Colombo User Manual

Product warranty and Customer service
warranty call the TecHelp Information Line
on 1300 369 193 or contact us by e-mail at:
tcpsupport@ingrammicro.com.au
If it is necessary to have the product serviced,
the Customer Service Representative will
inform you of the product return process.
Please ensure that:
a. You provide proof of purchase;
b. Your product is suitably packaged;
and
c. You have included all components from the
original purchase.
Subject to your Statutory Rights:
a. Any claim under this warranty is limited
to the cost of repair or replacement of the
product; and
b. If the goods are found to be in sound
working order by the authorised service
centre, you may be charged a fee for service
60
and for any other direct costs associated with
having the product delivered for service.
For your records
Date of purchase:
______________________________
Place of purchase:
______________________________
Serial number:
______________________________
For guarantee purposes proof of purchase is
required so please keep your receipt.

Wall mounting template

Your Telstra Colombo base unit (or extension
handset charger if you have purchased one)
can be wall mounted directly on to a wall.
1. Use this template to drill 2 holes in your
desired location. These holes should be
made 25mm deep using a 3mm diameter
drill.
2. Insert the wall plugs and insert a screw into
each hole. Leave 3mm between the head of
the screw and the wall.
3. Position the base unit or extension charger
on to the screws and slide down to secure.
NOTE: Check and ensure before drilling that you
will not be drilling into any hidden wiring or pipes.
61