Wall Mounting Template - Telstra Orb User Manual

ORB UG 148x105.indd, Spread 3 of 40 - Pages (78, 3) 19/3/08 10:22 AM

Wall mounting template

Your Telstra Orb main base unit (or extension
handset charger if you have purchased one) can be
wall mounted directly on to a wall.
1. Use this template to drill 2 holes in your desired
location. These holes should be made 25mm
deep using a 3mm diameter drill.
2. Insert the wall plugs and insert a screw into each
hole. Leave 3mm between the head of the screw
and the wall.
3. Position the base unit or extension charger on to
the screws and slide down to secure.
NOTE: Check and ensure before drilling that you will
not be drilling into any hidden wiring or pipes..
78
This User Guide provides you with all the
information you need to get the most from your
phone. Before you make your first call you will
need to set up your phone. Follow the simple
instructions on the next few pages.
Some Telstra services such as SMS, Messagebank®
and Calling Number Display may attract feature
and usage charges. Please visit Telstra.com for
details.
Need help?
If you have any problems setting up or using
your Telstra Orb, contact TecHelp on 1300 369
193 or email: tcpsupport@ingrammicro.com.au
Alternatively, you may find the answer in the
'Help' section at the back of this guide.
Hearing aid?
Please note that the Telstra Orb works by sending
radio signals between the base and handset.
These signals may interfere with some hearing
aids, causing a humming noise.
Got everything?
• Telstra Orb handset
• Telstra Orb base
• 2 x NiMH AAA rechargeable batteries
• Mains power adaptor
• Telephone line cord
If you have purchased a Telstra Orb multi handset
pack you will also have the following for each
additional handset:
• Telstra Orb handset
• Telstra Orb charger
• 2 x AAA NiMH rechargeable batteries
• Mains power adaptor (for the charger)
3