Table of Contents
Advertisement
Using the phone
CALL LIST
. The first entry in the call list is
displayed.
2. Scroll
to the entry you want.
3. Press
to dial the number.
Answer a call
1. When the phone rings and flashes in the
display, press
or press
to
answer the call via the loudspeaker. When
answering the handset from the base with
'Auto Pick up mode' set to ON, nothing
needs to be pressed.
WARNING: When the phone is ringing, avoid holding
the earpiece too close to your ear as it may damage
your hearing. Handsfree activation can suddenly
increase the volume in the earpiece to a very high
level. Make sure the handset is not too close to your
ear.
22
NOTE: If you have subscribed to Telstra's Calling
Number Display service and assigned a VIP Group to
the caller's number, the caller's details are displayed
before the phone starts ringing. You can set your
phone to give the default ringtone as soon as the call
is received then once the caller's identity is displayed,
the assigned ringtone will start.
TIP: If Auto Pick up mode is on, simply lift up the
handset from its base to answer the call. The default
setting is OFF. If Auto Pick up mode is set to OFF, you
will need to press
to answer a call.
NOTE: An incoming call has priority over other events.
Whenever there is an incoming call, other operations
in progress such as phone settings, menu navigation,
etc. will be ended.
To adjust the volume
1. During a call, press
to adjust
the earpiece or loudspeaker volume. - The
volume level is shown in the handset
display.
Using the phone
To mute the microphone
Mute the microphone so that you can talk to
someone else in the room without your caller
hearing you.
1. During a call, press
. The microphone is
muted.
2. Press
again to turn the microphone
back on.
To end a call
1. Press
. After you hang up, the duration
of your call is displayed on the handset
display for 5 seconds.
NOTE If auto hang-up is on, replace the handset on
the base to end the call. The default setting is ON.
To switch handset on/off
1. Press and hold
until the handset
switches off.
2. Press and hold
again to switch the
handset back on.
To call a second external number
Put an external caller on hold to make a
second external call. You can then switch
between both callers or hold a 3-Way Chat.
1. During your call, press
. Scroll
INIT 2ND CALL
.
2. Press.
. Display shows
CALLING R
3. Enter the second number.
4. When your second caller answers, press
to open the option menu:
CONFERENCE
- press
to initiate a 3-Way
Chat with the two external callers.
SWITCH CALLS
- press
to switch between
the two callers.
5. Press
to hang up both of the external
calls during a 3-Way Chat.
to
23
Advertisement
Table of Contents
