Adding Oil; Engine Oil - CanyCom S25A Operator's Manual

7
D i p st i ck
UPPER
LOWER
Maintenance

7.4 Adding Oil

If the oil level is not maintained or improper
oil is used, rotation will not be carried out
smoothly,and this will lead to failures and
reduction in the service of the machine.Always
use the specified good quality oil and make sure
that the oil level is not too high or too low.

7.4.1 Engine Oil

Inspection
Dipstick
Adding Oil
Oil filler plug
When the engine is at high temperature,there is
danger of burns, so wait for the engine to cool
down before removing the oil filler plug.
1. Open the engine cover. (See page 21)
2. Pull out the dipsick.
3. Visually check the engine oil level,condition
of dirt in the oil and the viscosity. If the level
is not as shown below,add engine oil. If the
oil is extremely dirty or the viscosity is not
correct,change the oil.
Engine oil level:
Between [UPPER]and [LOWER] lines
1. Remove the oil filler plug.
CAUTION
2. Add the specified oil through the oil filler port.
Oil to use:See page 36
-39-
NOTICE
7