Checking Engine Cooling Water Level And Adding Water; Adjusting Position Of Seat; Using Seat Belt (For Rops Model) - CanyCom S25A Operator's Manual

6
Reserve tank
Radiator cap
Rotation lock lever
Seat Back Adjuster
Seat Belt
Operation
If the radiator cap is opened during operation or
immediately after stopping,boiling water may spurt
out and cause burns.Always wait for the cooling
water to cool down before opening the cap(approx.
30 minutes after stopping the engine).
Slide Lever
Firmness Adjuster
For ROPS to provide effective protection, always
wear seat belt.
6.1.3 Checking Engine Cooling Water Level
and Adding Water
1. Open the engine cover. (See page 21)
2. Check the engine cooling water level visually to
check that it is between the [FULL] and [LOW]
lines. If the level is low,add water.(See page 44)
Cooling water amount: 7.2 liter

6.1.4 Adjusting Position of Seat

1. Pull the rotation lock lever up to make it possible
to turn the seat.
When the seat is turned, the direction that the
seat is facing is FORWARD for operation of the
steering lever.
2. Pull up the slide lever to adjust the seating
position.
3. Pull up the seat back adjuster to adjust the seat
back angle to your liking.
4. Pull the firmness adjuster to adjust the seat
firmness to suit your weight and preference. Pull
the adjuster lever fully to undo it.

6.1.5 Using Seat Belt (for ROPS model)

1. Buckle up the seat belt. Adjust the seat belt so
that it fits snugly over the pelvis.
-23-
CAUTION
NOTICE
CAUTION
6