Figure B-25: Auto Recovery Environment For Windows; Figure B-26: Building The Auto Recovery Partition - IEI Technology AFL-W10A-N270 User Manual

When the recovery tool setup menu appears, press <4> then <Enter>.
Step 5:

Figure B-25: Auto Recovery Environment for Windows

The Symantec Ghost window appears and starts configuring the system to build
Step 6:
an auto recovery partition. In this process the partition created for recovery files
in Section B.2.2 is hidden and the auto recovery tool is saved in this partition.

Figure B-26: Building the Auto Recovery Partition

After completing the system configuration, the following message prompts to
Step 7:
confirm whether to create a factory default image. Type Y to have the system
create a factory default image automatically. Type N within 6 seconds to skip this
Page 122
AFL-W10A-N270 User Manual