Cleaning And Inspection - SeaDoo Rotax 1503 4-Tec 2005 Engine Shop Manual

Section 01 ENGINES (1503 4-TEC)
Subsection 04 (LUBRICATION SYSTEM)
WARNING
Wear safety glasses and work in a well
ventilated area when working with strong
chemical products. Also wear suitable non-
absorbent gloves to protect your hands.
– Remove oil suction pump cover with oil separa-
tor housing and his cover.
NOTE: On the supercharged intercooled engine,
the oil suction pump cover and oil separator is a
one-piece design.
– Remove oil strainer no. 12.
TYPICAL — NATURALLY ASPIRATED AND
SUPERCHARGED ENGINES
1. Oil strainer
TYPICAL — SUPERCHARGED INTERCOOLED ENGINE
1. Oil strainer
48

Cleaning and Inspection

Clean oil strainer with a part cleaner then use an
air gun to dry it.
Always wear eye protector. Chemicals can
cause a rash break out in and an injury to your
eyes.
Inspect rubber rings no. 13 and no. 14.
TYPICAL — NATURALLY ASPIRATED AND
SUPERCHARGED ENGINES
1. O-ring
2. Rubber ring gasket
TYPICAL — SUPERCHARGED INTERCOOLED ENGINE
1. Gasket
2. Rubber ring gasket
If rubber rings are brittle, cracked or hard, replace
them.
www.SeaDooManuals.net
WARNING
SMR2005-035