Removal - SeaDoo Rotax 1503 4-Tec 2005 Engine Shop Manual

Section 01 ENGINES (1503 4-TEC)
Subsection 02 (INTAKE MANIFOLD AND SUPERCHARGER)
If the torque is not within specifications, repair
supercharger clutch. Verify supercharger clutch
components as per INSPECTION (PARTS DISAS-
SEMBLED) further in this section.

REMOVAL

Intake Manifold
NOTE: Remove required parts to access intake
manifold. Refer to appropriate VEHICLE SHOP
MANUAL .
Remove oil dipstick.
Pull fuel rail cover out.
Release the fuel pressure in the system, refer to
ENGINE MANAGEMENT section of the appropri-
ate VEHICLE SHOP MANUAL .
Disconnect battery cables from battery.
WARNING
Always disconnect battery cables exactly in
the specified order, BLACK negative cable
first then the RED positive battery cable last.
Disconnect fuel hose connector at fuel rail.
Step 1: Squeeze
Step 2: Pull out
1. Supporting tabs
2. Squeeze in middle of supporting tabs, hold and pull out
Cut locking ties where shown.
12
NATURALLY ASPIRATED ENGINE
1. Cut locking ties to release harness
SUPERCHARGED ENGINE
1. Cut locking ties to release harness
www.SeaDooManuals.net
SMR2005-033