Table of Contents
Advertisement
ZyWALL 5/35/70 Series User's Guide
Table 13 ISP Parameters : PPTP Encapsulation
LABEL
Connection ID/
Name
WAN IP Address
Assignment
IP Address
Assignment
My WAN IP
Address
First DNS Server
Second DNS
Server
Apply
3.2.2 Internet Access Wizard: Second Screen
Click Next to go to the screen where you can register your ZyWALL and activate the free
content filtering, anti-spam, anti-virus and IDP trial applications. Otherwise, click Skip to
display the congratulations screen and click Close to complete the Internet access setup.
Note: Make sure you have installed the ZyWALL Turbo Card before you activate the
IDP and anti-virus subscription services.
Turn the ZyWALL off before you install or remove the ZyWALL Turbo Card.
Figure 18 Internet Access Wizard: Second Screen
85
DESCRIPTION
Enter the connection ID or connection name in this field. It must follow the "c:id"
and "n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your xDSL modem.
Select Dynamic If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static If the ISP assigned a fixed IP address.
The fields below are available only when you select Static.
Enter your WAN IP address in this field.
Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do
not configure a DNS server, you must know the IP address of a machine in order
to access it.
Click Apply to save your changes and go to the next screen.
Chapter 3 Wizard Setup
Advertisement
Table of Contents
Troubleshooting
