Using automatic mode
Press
1
Adjust the temperature setting.
2
To stop the operation, press
3
control screen.
Automatic mode indicator
■
If the fan speed setting or air flow modes are operated, the automatic mode
indicator goes off. However, automatic mode for functions other than that
operated are maintained.
Adjusting the temperature for driver and passenger seats separately
■
("DUAL" mode)
To turn on the "DUAL" mode, perform any of the following procedures:
Press
●
Select "DUAL" on the option control screen.
●
Adjust the passenger' s side temperature setting.
●
The indicator comes on when the "DUAL" mode is on.
While in "DUAL" mode, the temperature of the rear air outlets is set at the right-
hand side temperature setting.
Other functions
Switching between outside air and recirculated air modes
■
Press
Press
The indicator above the selected button comes on.
Micro dust and pollen filter
■
Pollen is removed from the air and the air flows to the upper part of the body.
Select
When the micro dust and pollen filter is on,
ing control screen.
In order to prevent the windshield from fogging up when the outside air is cold, the
dehumidification function may operate.
The pollens are filtered out even if the micro dust and pollen filter is turned off.
IS350/250_U (OM53C50U)
6-1. Using the air conditioning system
, or select "AUTO" on the air conditioning control screen.
.
to change to recirculated air mode.
to change to outside air mode.
on the option control screen.
or select "OFF" on the air conditioning
is displayed on the air condition-
361
6