Lexus IS250 U Owner's Manual page 218

218
4-5. Using the driving support systems
Setting up intuitive parking assist
You can change the warning beep volume and Lexus Display Audio screen
operating conditions.
Press the "MENU" button on the Lexus Display Audio controller. (P. 268)
1
Select "SETUP" on the "Menu" screen.
2
Select "Vehicle" on the "Setup" screen.
3
Select "LEXUS Park Assist" on the "Vehicle Settings" screen.
4
Select the desired button.
5
The alert volume can be adjusted.
1
On or off can be selected for intu-
2
itive parking assist display.
Front or rear center sensors dis-
3
play and tone indication can be
set.
The intuitive parking assist can be operated when
■
Front center sensors:
●
• The engine switch is in IGNITION ON mode.
• The shift lever is in a position other than P or R.
• The vehicle speed is less than about 6 mph (10 km/h).
Front corner sensors:
●
• The engine switch is in IGNITION ON mode.
• The shift lever is in a position other than P.
• The vehicle speed is less than about 6 mph (10 km/h).
(At any speed when the shift lever is in R)
Rear corner and rear center sensors:
●
• The engine switch is in IGNITION ON mode.
• The shift lever is in R.
IS350/250_U (OM53C50U)