Lexus IS250 U Owner's Manual page 160

160
4-2. Driving procedures
Changing engine switch modes
Modes can be changed by pressing the engine switch with brake pedal released.
(The mode changes each time the switch is pressed.)
Off*
1
The emergency flashers can be used.
The multi-information display will not be
displayed.
ACCESSORY mode
2
Some electrical components such as the
audio system can be used.
"ACCESSORY" will be displayed on the
meters.
IGNITION ON mode
3
All electrical components can be used.
"IGNITION ON" will be displayed on
the meters.
*
: If the shift lever is in a position other than
P when turning off the engine, the
engine switch will be turned to ACCES-
SORY mode, not to off.
When stopping the engine with the shift lever in a position other than P
If the engine is stopped with the shift lever in a position other than P, the engine
switch will not be turned off but instead be turned to ACCESSORY mode. Per-
form the following procedure to turn the switch off:
Check that the parking brake is set.
1
Shift the shift lever to P.
2
Check that "Turn Power OFF" is displayed on the multi-information display
3
and then press the engine switch once.
Check that "Turn Power OFF" on the multi-information display is off.
4
IS350/250_U (OM53C50U)