Lexus IS250 U Owner's Manual page 447

Remove the light bulb.
4
Install a new light bulb then install
5
the bulb base to the light unit by
inserting it and turning the bulb
base clockwise.
After installing the light bulb, turn on
the front turn signal light to visually
check that there is no light leaking
from the bulb base.
Reinstall the fender liner, fasten
6
the clamp and install the 2 clips.
Install the lower clip by inserting it
with the clip groove held vertically
straight.
IS350/250_U (OM53C50U)
7-3. Do-it-yourself maintenance
447
7