Using Automatic Mode; Automatic Mode Indicator; Adjusting The Temperature For Driver And Passenger Seats Separately; Micro Dust And Pollen Filter - Lexus 2016 IS 200t Service Manual

Using automatic mode

Press , or select "AUTO" on the air conditioning control screen.
1
Adjust the temperature setting.
2
To stop the operation, press
3
control screen.

Automatic mode indicator

■
If the fan speed setting or air flow modes are operated, the automatic mode
indicator goes off. However, automatic mode for functions other than that
operated is maintained.

Adjusting the temperature for driver and passenger seats separately

■
("DUAL" mode)
To turn on the "DUAL" mode, perform any of the following procedures:
Press
●
Select "DUAL" on the option control screen.
●
Adjust the passenger' s side temperature setting.
●
The indicator comes on when the "DUAL" mode is on.
While in "DUAL" mode, the temperature of the rear air outlets is set at the right-
hand side temperature setting.

Other functions

Switching between outside air and recirculated air modes
■
Press to change to recirculated air mode.
Press to change to outside air mode.
The indicator above the selected button comes on.

Micro dust and pollen filter

■
Pollen is removed from the air and the air flows to the upper part of the body.
Select
When the micro dust and pollen filter is on,
ing control screen.
In order to prevent the windshield from fogging up when the outside air is cold, the
dehumidification function may operate.
The pollens are filtered out even if the micro dust and pollen filter is turned off.
IS350/300/200t_U (OM53D18U)
6-1. Using the air conditioning system
or select "OFF" on the air conditioning
.
on the option control screen.
371
is displayed on the air condition-
6