Lexus IS250 U Owner's Manual page 450

450
7-3. Do-it-yourself maintenance
Install a new light bulb then install
5
the bulb base to the light unit by
inserting it and turning the bulb
base clockwise.
After installing the light bulb, turn on
the rear turn signal light to visually
check that there is no light leaking
from the bulb base.
Align the tabs and push the light
6
unit toward the front of the vehicle
to install it.
Remove the protective tape applied
to the peripheral of the light unit
installation surface on the vehicle
body.
Install the 2 screws and 2 covers.
7
IS350/250_U (OM53C50U)