Lexus IS250 U Owner's Manual page 449

Rear turn signal lights
■
Open the trunk, and remove the
1
2 covers and 2 screws.
When removing the cover, wrap the
tip of the screwdriver with tape to
protect the vehicle from damage.
Push and pull the light unit toward
2
the rear of the vehicle as shown in
the illustration to remove it.
Apply protective tape to the periph-
eral of the light unit installation sur-
face on the vehicle body, such as the
rear bumper, to protect the vehicle
from damage.
Pushing on the portion A in the illus-
tration toward the rear of the vehicle
will make disengagement of the tabs
easier.
Turn the bulb base counterclock-
3
wise.
Remove the light bulb.
4
IS350/250_U (OM53C50U)
7-3. Do-it-yourself maintenance
449
7