Lexus IS250 U Owner's Manual page 451

Back-up light
■
Open the trunk, remove the 3
1
clips on the side which the bulb is
to be replaced and pull back the
trunk lid cover.
Turn the bulb base counterclock-
2
wise.
Remove the light bulb.
3
Pull out the connector carefully,
ensuring that excessive pulling load is
not applied to the wire harness.
Install a new light bulb then install
4
the bulb base to the light unit by
inserting it and turning the bulb
base clockwise.
After installing the light bulb, turn on
the back-up light to visually check
that there is no light leaking from the
bulb base.
Reinstall the trunk lid cover with the 3 clips.
5
To install the clips, simply push them in.
IS350/250_U (OM53C50U)
7-3. Do-it-yourself maintenance
451
7