Lexus IS250 U Owner's Manual page 90

90
2. Instrument cluster
Rev peak (F SPORT models)
■
Select to set the rev peak on/off.
When set to on and the engine speed
reaches or exceeds 5000 rpm, an
afterimage of the tachometer will be
displayed at the highest engine
speed for approximately 0.5 sec-
onds.
Initialization
■
Select to reset the meter display settings. (P. 538)
Eco Driving Indicator
■
Eco Driving Indicator Light
1
During Eco-friendly acceleration (Eco driv-
ing), the Eco Driving Indicator Light will turn
on. When the acceleration exceeds the Zone
of Eco driving, or when the vehicle is stopped,
the light turns off.
Eco Driving Indicator Zone Display
2
Suggests the Zone of Eco driving with current
Eco driving ratio based on acceleration.
Eco driving ratio based on acceleration
3
If the acceleration exceeds the Zone of Eco
driving, the right side of the Eco Driving Indi-
cator Zone Display will illuminate.
Zone of Eco driving
4
Eco Driving Indicator will not operate under the following conditions:
The shift lever is in any position other than D.
●
A paddle shift switch is operated.
●
Neither normal mode nor Eco drive mode is selected. (P. 237)
●
The vehicle speed is approximately 80 mph (130 km/h) or higher.
●
Suspension of the settings display
■
In the following situations, the settings display using the meter control switches will be
suspended.
When a warning message appears on the multi-information display
●
When the vehicle begins to move
●
IS350/250_U (OM53C50U)