Upc-A Number System; Upc-A Addenda - Honeywell 5010 User Manual

UPC-A Number System

The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will not
transmit it. Default = On.
* On

UPC-A Addenda

This selection adds 2 or 5 digits to the end of all scanned UPC-A data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
7 - 23