Semi Font - Honeywell 5010 User Manual

MICR E-13B Font
MICR E-13B On allows you to scan MICR characters on a bank check. The
default setting allows you to scan any eight digit combination. If you have
created an OCR template, character combinations that fit the template can be
scanned (see Creating an OCR
Note: TOAD characters (Transit, On Us, Amount and Dash) are output in the
following manner:
the transit character is output as T
the amount character is output as A
the on us character is output as O
the dash character is output as D

SEMI Font

SEMI Font On allows you to scan the SEMI font used in the semiconductor
industry.
All OCR Off turns off all OCR capability in the imager, so the imager will be able
to scan linear, stacked, matrix, and composite bar codes, but not OCR fonts.
However, any OCR templates you have created will be retained in memory.
Template, page 9-4).
MICR E-13B On
SEMI Font On
* All OCR Off
9 - 3