Section 1 Specifications - Icom IC-PW1 Service Manual Addendum

SECTION 1
• IC-PW1
GENERAL
M
• Frequency range
• Duty cycle
• Input connector
• Output connector
• Power supply voltage
• Usable temperature range
• Dimensions
(Projections not included)
• Weight
(Included in the remote controller)
LINEAR AMPLIFIER
M
• Output power
• Driving power
• Sprious emissions
ANTENNA TUNER
M
• Output matching range
• Auto tuning accuracy
• Min. required input power
• Insertion loss
SPECIFICATIONS
: 1.800–1.999 MHz
3.500–3.999 MHz
4.630 MHz
7.000–7.300 MHz
10.100–10.150 MHz
14.000–14.350 MHz
18.068–18.168 MHz
21.000–21.450 MHz
24.890–24.990 MHz 1
*
1
28.000–29.700 MHz
*
50.000–54.000 MHz
1 The USA version can only be used the antenna tuner on the 24–28 MHz bands.
*
: Full duty
: SO-239 × 2 (50 Ω)
: SO-239 × 4 (50 Ω)
: 90 V–132 V AC or 180 V–264 V AC
(single-phase; 50/60 Hz)
: –10 ˚C to +40 ˚C; +14 ˚F to +104 ˚F
: Linear amplifier
Remote controller
: 25 kg; 55.12 lb
:
MODE
90–132 V AC
CW, RTTY
450–600 W
SSB
450–600 W PEP
1
* EUR-1 version is 450–550 W;
2
* EUR-1 version is 450–550 W PEP
: Max. 100 W
: Less than –60 dB (for HF bands)
Less than –70 dB (for 50 MHz band)
1
: 16.7–150.0 Ω (for HF bands)
*
20.0–125.0 Ω (for 50 MHz band)
1
* Specifications of 1.9 MHz band guaranteed 1.85–1.95 MHz
: VSWR 1.5:1 or less
: 60 W
: Less than 1 dB (after tuning)
350(W)×265(H)×375(D) mm;
13.78(W)×10.43(H)×14.76(D) in
205(W)×71(H)×68.3(D) mm;
8.07(W)×2.80(H)×2.69(D) in
(Included in the remote controller and PX-1981)
INPUT AC VOLTAGE
180–264 V AC
1
950–1150 W
*
2
950–1150 W PEP
*
1 - 1