Specifications - Icom IC-PW1 Instruction Manual

5

SPECIFICATIONS

I General
• Frequency coverage: 01.800–01.999 MHz
• Antenna connector :
Input
Output
• Usable temperature : –10°C to 40°C
range
• Power supply requirement:
non-Europe versions 100–120 V AC or
Europe version
(W × H × D)
• Dimensions
Linear amplifier
Remote controller
• Weight
• CI-V connector
19
03.500–13.999 MHz
07.000–17.300 MHz
10.100–10.150 MHz
14.000–14.350 MHz
18.068–18.168 MHz
21.000–21.450 MHz
1
24.890–24.990 MHz
*
1
28.000–29.700 MHz
*
50.000–54.000 MHz
1
* The U.S.A. version can only be
used the antenna tuner on the
24–28 MHz bands.
PL-239 × 2 (50 Ω)
PL-239 × 4 (50 Ω)
(14°F to 104°F)
200–240 V AC
(±10 %)
230 V AC
(±10 %)
:
350 × 265 × 375 mm
× 10 × 14
25 7 3
13 ⁄ ⁄ ⁄ in
32 16 4
205 × 71 × 68.3 mm
× 2 × 2
1 25 11
8 ⁄ ⁄ ⁄ in
16 32 16
(Projections not included)
: Approx. 25 kg (55 lb)
(incl. remote controller)
1
: 2-conductor 3.5 mm (
(d)
We Icom Inc. Japan
1-1-32, Kamiminami, Hirano-ku
Osaka 547-0003, Japan
Declare on our sole responsibility that this equipment complies with the
essential requirements of the Radio and Telecommunications Terminal
Equipment Directive, 1999/5/EC, and that any applicable Essential Test
Suite measurements have been performed.
Kind of equipment: HF+50 MHz 1 kW LINEAR AMPLIFIER
iPW1EURO+ OPC-853
Type-designation:
Version (where applicable):
This compliance is based on conformity according to Annex III of the
directive 1999/5/EC using the following harmonised standards:
i) Article 3.1a EN 60950-1 (2001)
EN60065:2002 +A1:2006 (Power supply)
EN60065:1998 (Power supply)
ii) Article 3.1b EN 301489-1 and EN 301489-15
iii) Article 3.2 EN 301 783-2
I Transmitter
• Output power
MODE
CW, RTTY
SSB
• Driving power
• Spurious emissions : –60 dB
• SEND connector
• ALC connector
I Antenna tuner
• Matching impedance range:
2
HF bands*
50 MHz band
2
* The U.S.A. version can only be tuned within
1.80–1.95 MHz of the 1.8 MHz band.
• Minimum operating input power:
• Tuning accuracy
• Insertion loss
⁄ ")
8
DECLARATION
OF CONFORMITY
Düsseldorf 1st Dec. 2006
Place and date of issue
Icom (Europe) GmbH
Himmelgeister straße 100
D-40225 Düsseldorf
Authorized representative name
H.Ikegami
General Manager
Signature
:
INPUT AC VOLTAGE
200–240 V AC 100–120 V AC
1 kW 500 W
1 kW PEP 500 W PEP
: 100 W max.
(HF bands)
–70 dB
(50 MHz band)
: Phono (RCA)
: Phono (RCA)
16.7 to 150 Ω unbalanced
(Less than VSWR 3:1)
20 to 125 Ω unbalanced
(Less than VSWR 2.5:1)
60 W
: VSWR 1.5:1 or less
: Less than 1.0 dB
(after tuning)