Specifications - Icom IC-PW1 Instruction Manual

General
• Frequency coverage: 01.800–01.999 MHz
03.500–13.999 MHz
07.000–17.300 MHz
10.100–10.150 MHz
14.000–14.350 MHz
18.068–18.168 MHz
21.000–21.450 MHz
24.890–24.990 MHz
28.000–29.700 MHz
50.000–54.000 MHz
1
*
• Antenna connector :
Input PL-239 2 (50 )
Output PL-239 4 (50 )
• Usable temperature : –10°C to 40°C
range
• Power supply requirement:
non-Europe versions 100–120 V AC or
200–240 V AC
Europe version 230 V AC
• Dimensions :
(W H D)
Linear amplifier 350
13
Remote controller 205
8
(Projections not included)
• Weight : 25 kg (55 lb)
(incl. remote controller)
• CI-V connector : 2-conductor 3.5
Versions of the IC-PW1 which dis-
play "CE" on the serial number seal,
comply with the essential require-
ments of the 89/336/EEC directive
for Electromagnetic Compatibility.
NOTE: To meet European EMC regulations,
the OPC-853 AC cable with EMC filter must be
connected to the IC-PW1 Europe version.
1
*
1
*
The U.S.A. version can only be
used the antenna tuner on the
24–28 MHz bands.
(14°F to 104°F)
(±10 %)
(±10 %)
265 375 mm
25 7 3
⁄ 10 ⁄ 14 ⁄ in
32 16 4
71 68.3 mm
1 25 11
⁄ 2 ⁄ 2 ⁄ in
16 32 16
1
mm ( ⁄ ")
(d)
8
Icom Inc. Japan
6-9-16, Kamihigashi, Hirano-ku
Osaka 547-0002, Japan
Kind of equipment: HF+50 MHz 1 KW LINEAR AMPLIFIER
Type-designation:
These equipments comply with the European harmonised standard
ETS300 684 (EMC product standard for Commercially Available
Amateur Radio Equipment).
These equipments also comply with the requirements of the 73/23/EEC
directive for electrical safety. This compliance is based upon the
harmonised CENELEC generic standard EN60 065: 1993 +A11.
(Report No.: E 9861504 E 01 and E 9860764 E 01 by TÜV Rheinland
Germany)

SPECIFICATIONS

Transmitter
• Output power
MODE
200–240 V AC
CW, RTTY
SSB 1 kW PEP
• Driving power
• Spurious emissions : –60 dB
• SEND connector
• ALC connector
Antenna tuner
• Matching impedance range:
2
HF bands*
50 MHz band
2
* The U.S.A. version can only be tuned within 1.80–1.95
MHz of the 1.8 MHz band.
• Minimum operating : 60 W
input power
• Tuning accuracy
• Insertion loss
IC-PW1
+ opC-853
:
INPUT AC VOLTAGE
100–120 V AC
1 kW 500 W
500 W PEP
: 100 W max.
(HF bands)
–70 dB
(50 MHz band)
: Phono (RCA)
: Phono (RCA)
16.7 to 150 unbalanced
(Less than VSWR 3:1)
20 to 125 unbalanced
(Less than VSWR 2.5:1)
: VSWR 1.5:1 or less
: Less than 1.0 dB
(after tuning)
DECLARATION
OF CONFORMITY
Düsseldorf 14D. Dec. 1998
Place and date of issue
Icom (Europe) GmbH
Himmelgeister straße 100
D-40225 Düsseldorf
Authorized representative name
Icom (Europe) GmbH
T. Aoki
General Manager
Signature
5
16