Howtoload, Play, Remove Acd - Sanyo CDF-R800 Operating Instructions Manual

How to load, play, remove a CD
Disc slot ~
Eject button ~
e'abe'side
How to load and play a CD
1.
Insert a CD into the Disc slot with the label side facing up.
The Disc set indicator [DISC IN] will appear and CD play will begin.
Notes:
. When you insert a disc, make sure that the label side is up. If the CD is placed
upsidedown, [E: 07] will appear and the unit will eject the CD automatically.
Do not insert another CD when the Disc set indicator [DISC IN] is shown.
Because the Disc slot can accommodate only one CD.
. You can not insert a CD when the ACC is off.
. Do not use an 8 cm CD Adapter. The unit plays 8 cm CD just like a 12 cm CD
without an adapter.
2. Adjust the volume and tone quality. (See page 8 "Audio control".)
Hint:
After the whole CD has been played, play will start again from the beginning of
the first track.
How to remove a CD
Press the Eject button (~ ).
Hints:
When you insert the CD into the Disc slot again, play starts from the beginning of
the first track.
When you turn on ACC after having turned it off during CD play, the unit starts CD
play from the point at which you stopped the play by turning ACC off.
11