Clock Operation - Sanyo CDF-R800 Operating Instructions Manual

Clock operation
The
play
following operations are effective while the power is on. Though the Clock dis-
is shown when the power is off, you can not adjust nor set the time.
r— Display select button
I
~Audio Control mode select button
'Clock adjust button
To adjust the time
1. See that the Clock display is shown.
Hint:
o
If the Clock display is not shown, press the Display select button ( ~l~P) to
show the Clock display for a moment (about 5 seconds).
2. While holding down the Display select button ( 9P ), press the (~\) or(~)
side of the Clock adjust button.
To set hour digits : Press ( ~\) side.
TO set minute
digits : Press (~) side.
Hint:
. Press and hold the button to advance the time quickly.
Notes:
. This is a 12-hour clock.
The clock setting is retained when the power is turned off.
To set the time to the nearest half-ho~r
While holding down the Display select button ( ~P ), press the Audio control mode
select button (@).
The time is set as follows:
EX.lO:OO -10:29 O 10:00
10:30-11:00 d 11:00
10