Howtoload,Play,Removeacd - Sanyo CDF-R800 Operating Instructions Manual

How to load, play, remove a CD
How to load and play a CD
1. Insert a CD into the Disc slot with the label side facing up.
The Disc set indicator [DISC IN] will appear and CD play will begin.
N o t e s :
When you insert a disc, make sure that the label side is up. If the CD is placed
l
upsidedown, [E ! 071
Do not insert another CD when the Disc set indicator [DISC IN] is shown.
l
Because the Disc slot can accomodate
You can not insert a CD when the ACC is off.
l
Do not use an 8 cm CD Adapter. The unit plays 8 cm CD just like a 12 cm CD
l
without an adapter.
2. Adjust the volume and tone quality. (See page 8 "Audio control".)
H i n t :
After the whole CD has been played, play will start again from the beginning of
l
the first track.
How to remove a CD
Press the Eject button (p ).
Hints:
When you insert the CD into the Disc slot again, play starts from the beginning of
l
the first track.
When you turn on ACC after having turned it off during CD play, the unit starts CD
l
play from the point at which you stopped the play by turning ACC off.
1 1
will appear and the unit will eject the CD automatically.
only one CD.