How To Play Cds, Pause, Selecting Adisc/Track - Sanyo CDF-R800 Operating Instructions Manual

How to play CDs, Pause, Selecting a disc / track
A compatible SANYO CD Changer must be connected.
Changer mode select button
Play / Pause button
'L'
\
+ "3 a
$;Qp[~j'""eg
\2 ~+lm
mu SCN ~
i , 1
.
Disc select button
Track I Skip button
How to play CDs
@
1. Press the Changer mode select button ( .1, ) to switch immediately to Changer
mode from other mode (Radio, CD, Power off mode ).
2. Adjust the volume and tone quality. (See page 8 "Audio control".)
Hint:
. When the CD Changer is used for the first time, or when the CD magazine has
been changed, p/ay will begin from the first track of the first disc.
Pause
m
Press the Play / Pause button ( .ll
) during play to stop the play temporarily.
To resume play from the point at which play was stopped, press the button again.
Note:
. If the unit is left in the Pause mode for more than 5 minutes, the power will switch
off automatically.
Selecting a disc
Press one of the Disc select buttons (~\, ~~ ) to select a disc.
=
Selecting a track
o
Pressing the ( ~ ) or ( > ) side of the Track/Skip button ( ""K* ), select a track.
Desired Track
Press this side.
Next Track
w
Current Track
(from the beginning)
+4
Preceding Track
* (twice successively)–
17