Using The Web Browser; Checking Your Web Browser Security Level - Interlogix UltraView IP PTZ 36X User Manual

Chapter 3

Using the Web browser

The camera can be configured and controlled using an internet browser such as
Microsoft Internet Explorer (IE). The procedures described use Microsoft Internet
Explorer (IE) Web browser.
You must have administrator rights on your PC in order to configure the cameras
over the internet.

Checking your Web browser security level

When using the Web browser interface, you can install ActiveX controls to
connect and view video using Internet Explorer. However, you cannot download
data, such as video and images due to the increased security measure.
Consequently you should check the security level of your PC so that you are able
to interact with the cameras over the Web and, if necessary, modify the Active X
settings.
Configuring IE Active X controls
You should confirm the ActiveX settings of your Web browser.
To change the Web browser's security level:
1. In Internet Explorer, click
2. On the Security tab, click the zone to which you want to assign a Web site
under "Select a Web content zone to specify its security settings".
3. Click Custom Level.
4. Change the ActiveX controls and plug-ins
- Or -
Under Reset Custom
the Reset To box, and select Low. Click Reset. Then click
Options Security tab screen.
5. Click Apply in the
UltraView IP PTZ 36X Camera User Manual
Internet Options
Settings, click the security level for the whole zone in
Internet Options Security tab screen.
on the Tools menu.
options to Enable
OK
and click OK.
to the Internet
13