Interlogix TruVision PTZ 36X User Manual
  1. Manuals
  2. Brands
  3. Interlogix Manuals
  4. Security Camera
  5. TruVision PTZ 36X
  6. User manual

Interlogix TruVision PTZ 36X User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TruVision PTZ 36X Camera
User Manual
P/N 1072593 • REV D • ISS 10OCT12 

Advertisement

Table of Contents
loading

Related Manuals for Interlogix TruVision PTZ 36X

Summary of Contents for Interlogix TruVision PTZ 36X

  • Page 1 TruVision PTZ 36X Camera User Manual P/N 1072593 • REV D • ISS 10OCT12 ...
  • Page 2 Copyright © 2012 UTC Fire & Security. All rights reserved. Trademarks and Interlogix and Truvision names and logos are trademarks of patents UTC Fire & Security. Other trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products.

  • Page 3: Table Of Contents

    Title settings 36   Preset points settings 37   Sequence settings 38   Autopan settings 39   Cruise settings 40   Home settings 41   Chapter 5 Advanced setup 43   Default 43   TruVision PTZ 36X Camera User Manual...
  • Page 4   Time setting 56   Schedule settings 57   Appendix A Specifications 59   Appendix B Camera settings checklist 61   Appendix C Contact information 67   Contacting support 67   Index 69   TruVision PTZ 36X Camera User Manual...

  • Page 5: Product Introduction

    Chapter 1 Product introduction Product overview The TruVision PTZ 36X Camera is an innovative camera designed for middle and small surveillance applications. It possesses true PTZ camera features and has a graphical programming interface for easier customization of camera settings.
  • Page 6 Auto focus • Auto white balance • Auto gain control • Auto iris control • Removable IR cut filter • Minimum illumination: 0.1 Lux (Color), 0.01 Lux (B/W) • 2D / 3D video noise reduction TruVision PTZ 36X Camera User Manual...

  • Page 7: System Requirements

    Chapter 1: Product introduction System requirements For proper operation, adhere to the following operational, cable, and power requirements for TruVision PTZ 36X Cameras. Figure 1: Example of a system 1. Monitor A 4. DVR /Multiplexer/ Quad/ Switcher 2. Monitor B 5.
  • Page 8 Table 2: Recommended power cable gauges based on maximum lengths for an operating voltage of 24 VAC (±10%) Indoor dome cameras Outdoor dome cameras Wire gauge (14 W) (54 W) feet meters feet meters (diameter) 2.59 2061 2.05 1294 1.63 1.29 1.02 0.81 0.64 TruVision PTZ 36X Camera User Manual...

  • Page 9: Installation

    Chapter 2 Installation This chapter provides information on how to install the dome camera. Use a control keypad or device, such as the Interlogix KTD-405/KTD-405-2D keypad, to control the dome camera. Installation environment When installing your product, consider these factors: •...

  • Page 10: Unpacking The Dome Camera

    Items shipped with the indoor (Figure 2 below) and outdoor (Figure 3 on page 7) dome cameras include: Figure 2: Indoor dome camera contents Dome camera and 6” bubble Hard ceiling mount User manual M4 screws (X4) and plastic anchors (X4) TruVision PTZ 36X Camera User Manual...

  • Page 11: Removing The Protective Shipping Materials

    (away from the dome housing) on the bubble assembly. The bubble assembly is only held in place by compression, due to the gasket. TruVision PTZ 36X Camera User Manual...
  • Page 12 7. Place both hands on the bubble assembly ring and gently press down the bubble assembly. Make sure that the holes on the bubble assembly align with the holes in the dome camera housing. TruVision PTZ 36X Camera User Manual...

  • Page 13: Setting Up The Dome Camera

    11. Set the DIP switches. Setting up the dome camera To quickly put the TruVision PTZ 36X Camera into operation: 1. Configure the dome camera’s DIP switches, which are located on the top of the dome camera. 2. Set the dome camera communication protocol.

  • Page 14: Dip Switches And Connectors

    B. Dome camera site ID DIP switches F. RS-485 connector C. BNC Video Output G. 24VAC power connector D. Communication switch setting See the following sections on how to setup the ID and control protocol of the dome camera. TruVision PTZ 36X Camera User Manual...

  • Page 15: Setting The Dome Camera Communication Protocol

    Chapter 2: Installation Setting the dome camera communication protocol The TruVision PTZ 36X Camera can use several different protocols for communication. To select a protocol, you must set the protocol DIP switches to the correct sequence of 1s (on) and 0s (off).
  • Page 16 Chapter 2: Installation Protocol Baud rate Switch position Pelco P 9600 111000 Philips 9600 000100 AD422 4800 100100 9600 010100 Panasonic 19200 11010 9600 001100 DSCP 9600 101100 9600 011100 Chiper 9600 111100 TruVision PTZ 36X Camera User Manual...

  • Page 17: Setting The Rs-485 Communication

    CCTV specialist. DIP switches SW3 and SW4 are used for termination and Line Lock adjustment respectively. The SW5 DIP switch is used to restore the dome camera to the factory default status. TruVision PTZ 36X Camera User Manual...

  • Page 18: Setting The Dome Camera Site Id

    3. Place the switches that correspond to those values in the On position. 4. Carefully record the site ID of each dome camera installed. Table 5: DIP switch positions and equivalent values DIP switch position number Equivalent value TruVision PTZ 36X Camera User Manual...
  • Page 19 Chapter 2: Installation Table 6: Dome camera site ID DIP switch settings for dome cameras 1 to 30 Unit DIP switch Unit DIP switch Unit DIP switch TruVision PTZ 36X Camera User Manual...

  • Page 20: Ac 24V Power Connector Description

    Please make sure that the alarm connections are properly wired before starting to configure alarm related settings. Please refer to Figure 8 and Table 7 for alarm system wiring. Figure 8: Alarm I/O connector TruVision PTZ 36X Camera User Manual...

  • Page 21: Rs-485 Connector

    Table 7: Alarm I/O connector pin definition Definition ALARM_OUT_NO_1 ALARM_OUT_NC_1 ALARM_OUT_COM_1 ALARM_OUT_NO_2 ALARM_OUT_CN_2 ALARM_OUT_COM_2 ALARM_IN_4 ALARM_IN_3 ALARM_IN_2 ALARM_IN_1 RS-485 connector Please refer to Figure 9 below for RS-485 connector definition before wiring. Figure 9: RS-485 connector Definition TruVision PTZ 36X Camera User Manual...
  • Page 22 To wire the RS-485: 1. Connect the T+ and R+ together, and connect to the KTD-405 I/O box RS-485(A) connection. 2. Connect the T- and R- together, and connect to the KTD-405 I/O box RS-485(B) connection. TruVision PTZ 36X Camera User Manual...

  • Page 23: Wiring The Dome Camera

    A. Indoor dome camera, which is shipped with hard ceiling mount bracket B. Screws and screw anchors for fixing the ceiling mount to a hard ceiling (not supplied.) Tools needed  Drill  Screwdriver TruVision PTZ 36X Camera User Manual...
  • Page 24 (note that picture here shows a counterclockwise direction, because it is captured looking down from above). 6. Tighten the screw at the side of the fixing plate. TruVision PTZ 36X Camera User Manual...

  • Page 25: Mounting The Dome Camera On A Wall

     Wall Mount (TVP-LWM) Caution: Complete all installation steps before supplying power to the camera. Note: The TVP-LWM mounting hole patterns are compatible with other Interlogix PTZ mounts such as the GEA-105 (corner mount), GEA-106 (pole mount), and GEA-107 (roof mount).
  • Page 26 4. Run the cables through the pendant mount. The cables should exit from the pendant mount. Note: Block the cable-entry hole in the wall with the supplied sponges to prevent insects from entering the wall mount. TruVision PTZ 36X Camera User Manual...

  • Page 27: Mounting An Indoor Dome Camera In A Ceiling (Flush Mounting)

    Flush-mount ring Ceiling sticker M3x6 Screw (X2) Tools needed  Tool for cutting a hole in the ceiling  Screwdriver (#2 Phillips) Caution: Always check local building codes and safety regulations for additional precautions. TruVision PTZ 36X Camera User Manual...
  • Page 28 4. Disassemble the wings from the in-ceiling mount by loosening the three screws, as shown, until the wings are loose enough to turn out from the ring. TruVision PTZ 36X Camera User Manual...
  • Page 29 7. Route the cables down through the center hole and connect to camera. 8. Put the camera, with installed bottom mount, into the ceiling opening. 9. Tighten the screws, as shown, to affix the bottom mount to the in-ceiling bracket. TruVision PTZ 36X Camera User Manual...
  • Page 30 Chapter 2: Installation 10. Affix the trim ring to the in-ceiling bracket, as shown. TruVision PTZ 36X Camera User Manual...
  • Page 31 Chapter 2: Installation TruVision PTZ 36X Camera User Manual...

  • Page 33: Menu Overview

    ID. See Figure 13 on page 30. To download the current version of the firmware, please go to our web site, www.interlogix.com. TruVision PTZ 36X Camera User Manual...
  • Page 34 Displays the camera ID Time XXXX/XX/XX XX:XX Year/Month/Day Hour:Minute Position Display XX YYY/YY XX: direction that PTZ is pointed (N, E, S, W, NE, SE, SW, NW) YYY/YY: angle of PTZ (0 to 359, -10 to 90) TruVision PTZ 36X Camera User Manual...

  • Page 35: Main Menu Overview

    SEQUENCE ENTER AUTOPAN ENTER CRUISE ENTER HOME SETTING ENTER  MAIN PAGE 3 IR FUNCTION AUTO ALARM SETTING ENTER ALARM DETECT NONE WDR FUNCTION PRIVACY MASK ENTER TIME SETTING ENTER SCHEDULE ENTER EXIT OSD TruVision PTZ 36X Camera User Manual...
  • Page 36 Configures alarm detection. WDR FUNCTION Enable/disable the wide dynamic range feature. PRIVACY MASK Configures the privacy mask. TIME SETTING Configures the time and date of the dome camera. SCHEDULE Configures schedules for presets/sequence/autopans/cruises/IR function. TruVision PTZ 36X Camera User Manual...

  • Page 37: Using A Keypad To Program Menus

    We use the KTD-405 keypad controller (Figure 2) in this manual to explain the features of the TruVision PTZ 36X Camera because of the KTD-405’s ability to control all of the camera’s features. (For detailed keypad instructions, refer to the KTD-405/KTD-405-2D Controller Keypad User Manual.)
  • Page 38 Iris -: Esc. Exits a menu option. There is no need to select the menu option Exit to quit a menu. Figure 16: Joystick motion Scroll up Previous Next Scroll down Edit (turn joystick clockwise) TruVision PTZ 36X Camera User Manual...

  • Page 39: Basic Setup

    Chapter 4: Basic setup Chapter 4 Basic setup This chapter describes how to configure the basic options for the TruVision PTZ 36X Camera. The default values (where applicable) of the settings are listed in the checklist in Appendix B “Camera settings checklist” on page 61.

  • Page 40: Title Display

    3. On the keypad press the set key to enter the editing page. The Title Setting screen appears as shown below. 4. Using the direction keys of the keypad, select a character and press the set key to input. For example: A set B set C set TruVision PTZ 36X Camera User Manual...

  • Page 41: Preset Points Settings

    Once the preset point is saved, move the cursor to the next menu item to execute the preset point and confirm it is correct. Note: To freeze the image as the dome camera moves between preset points, see the option “Freeze” under “Camera setup menu 1” on page 47. TruVision PTZ 36X Camera User Manual...

  • Page 42: Sequence Settings

    RUN SEQUENCE Manually select which sequence to view after programming. EXIT Select Yes to save any changes and return to Main Page 2. TruVision PTZ 36X Camera User Manual...

  • Page 43: Autopan Settings

    Select Left for the camera to pan counterclockwise e from the start point to the end point, and then return to the start point. See the picture below. TruVision PTZ 36X Camera User Manual...

  • Page 44: Cruise Settings

    RECORD START You need to define where the cruise starts. RECORD END You need to define where the cruise ends. RUN CRUISE When the cruise is recorded, select this option to playback the cruise. TruVision PTZ 36X Camera User Manual...

  • Page 45: Home Settings

    This is listed if Autopan was selected as the return action mode. Select a preprogrammed autopan that the camera should execute after a period of inactivity. See “Autopan settings” on page 39 for more information. TruVision PTZ 36X Camera User Manual...
  • Page 46 The time period ranges between 1 and 128 minutes. If Home has been enabled, you can execute a home setting manually. EXIT Select Yes to save any changes and return to Main Page 2. TruVision PTZ 36X Camera User Manual...

  • Page 47: Advanced Setup

    (outside). Backlight correction forces the dome camera to ignore areas of high brightness, so the rest of the scene TruVision PTZ 36X Camera User Manual...
  • Page 48 (iris adjustment), by how long you keep the sensor exposed (shutter speed), and by other exposure parameters. This menu is located on Main Page 1. TruVision PTZ 36X Camera User Manual...
  • Page 49 3. Select one of the AE Mode options (Auto, Iris, Manual, or Shutter) using the set button. The option’s sub menu appears. 4. Select the desired value. The other AE mode options cannot be changed. 5. Exit the menu and return to Main Page 1. TruVision PTZ 36X Camera User Manual...
  • Page 50 Auto Tracing White Balance. Select to enable or disable auto tracing white balance. Its color temperature range is 2000 to 10,000°K. The white balance is calculated, or “traced”, more quickly than by the Auto function. TruVision PTZ 36X Camera User Manual...
  • Page 51 Digital zoom is activated when the full optical zoom level is reached. It can be set up to a maximum of 12X. The default setting is OFF. Note: Digital zoom may degrade image quality. TruVision PTZ 36X Camera User Manual...
  • Page 52 01 to 16, where 01 is no enhancement. This function could be used, for example, when there is text in a camera image. Enabling the function would make the text appear sharper. TruVision PTZ 36X Camera User Manual...
  • Page 53 The privacy mask function is automatically disabled if the E-flip function is enabled, and the screen will show “Mask will be set off.” M.E. (Mechanical Flip): This is a standard mechanical operation. As TruVision PTZ 36X Camera User Manual...
  • Page 54 For example: 0, set, 1, set 3, set , 4, set Passwords must have four digits. The default password is 0000. . In the Confirm Password line enter the same password again to confirm the setting. TruVision PTZ 36X Camera User Manual...
  • Page 55 (Day) mode. It can be toggled on and off using the KTD-405 keypad by pressing the esc key and flashlight buttons together. EXIT Select Yes to save any changes and return to Main Page 3. TruVision PTZ 36X Camera User Manual...
  • Page 56 When an alarm is triggered, there will also be a warning flashed on-screen. See Figure 1 on page 30. PRESET POINT Select a pre-programmed preset number that the camera should execute when an alarm contact is triggered. TruVision PTZ 36X Camera User Manual...
  • Page 57 Table 24: Alarm detect menu description Function Description DETECT SWITCH Enable or disable the alarm detect function. DETECT MODE Select the alarm detection mode: INT FOCUS: Trigger an alarm if the internal focus changes. TruVision PTZ 36X Camera User Manual...
  • Page 58 It can be toggled on and off using the KTD-405 keypad by pressing the esc key and the magnifying glass keys together. This menu is located on Main Page 3. TruVision PTZ 36X Camera User Manual...
  • Page 59 PRIVACY SWITCH Enable or disable this option. The default setting is Off. TRANSPARENCY Select Set whether the color of privacy mask is transparent. Select On to display transparent masks The default setting is Off. TruVision PTZ 36X Camera User Manual...
  • Page 60 Select Yes to save any changes and return to Main Page 3. Time setting Set the time and date related parameters of the dome camera. Figure 28: Time setting menu TIME SETTING TIME DISPLAY SET YEAR SET MONTH SET DAY SET HOUR SET MINUTE EXIT+SAVE TruVision PTZ 36X Camera User Manual...
  • Page 61 Select the minute at which the schedule point is executed every day. MODE Select the mode that is activated for the schedule point: None: No action is executed. Preset: This mode is executed for the selected scheduled point. TruVision PTZ 36X Camera User Manual...
  • Page 62 If the Day/Night mode is enabled, the Auto Day/Night will be activated for a schedule point. SCHEDULE RESET Users can reset the whole schedule with the item EXIT Select Yes to save any changes and return to Main Page 3. TruVision PTZ 36X Camera User Manual...
  • Page 63 Power consumption 20 W (Indoor), 50 W (Outdoor with heater on) Battery removal The TruVision PTZ 36X Camera contains one 3 V Lithium battery. To remove the battery: 1. Disassemble the PTZ by removing the three screws shown here. TruVision PTZ 36X Camera User Manual...
  • Page 64 Appendix A: Specifications 2. Locate the battery, as shown below, and carefully remove it. Battery 3. Dispose of the battery as required by local ordinances or regulations. TruVision PTZ 36X Camera User Manual...
  • Page 65 Appendix B: Camera settings checklist Appendix B Camera settings checklist Use this checklist to record the menu settings of each dome camera. Default values are highlighted in bold, where applicable. TruVision PTZ 36X Camera User Manual...
  • Page 66 Indoor Outdoor Manual R Gain : 000 to 127 B Gain: 000 to 127 SETUP Zoom Speed MENU 1 Max. Digital Zoom Off, 2X, 12X Slow Shutter On, Off D.N.R. 2D N.R. On, Off TruVision PTZ 36X Camera User Manual...
  • Page 67 ENTER AUTOPAN Autopan 1 to 4 Start Point PT Move, To Save End Point PT Move, To Save Direction Right, Left Speed 01 to 04 Run Autopan ENTER CRUISE Cruise Line 1 to 8 TruVision PTZ 36X Camera User Manual...
  • Page 68 001 to 127 sec., Always, Off Alarm Priority 001 to 004 Alarm Output Off, 1, 2, Both ALARM Detect Switch On, Off DETECT Detect Mode Motion Block Mode None; Motion: On, Off Frame Set None; Motion: 01 to 04 TruVision PTZ 36X Camera User Manual...
  • Page 69 00 to 23 Minute 00 to 59 Mode None No Action Preset Preset Point 001 to 256 Sequence Sequence 001 to 008 Autopan Autopan 001 to Cruise Cruise 001 to IR Func. Auto, On, Off TruVision PTZ 36X Camera User Manual...
  • Page 70 Appendix B: Camera settings checklist Main Option Menu Sub menus and options Menu configured EXIT OSD TruVision PTZ 36X Camera User Manual...
  • Page 71 (Monday through Friday, excluding holidays) or contact your local supplier. Table 28: Technical support North America 888.437.3287 Toll-free in the US, Puerto Rico, and Canada. +1 503.885.5700 outside of the toll-free area. +1.888.329.0331, +1.888.329.0332 techsupport@interlogix.com TruVision PTZ 36X Camera User Manual...
  • Page 72 Appendix C: Warranty and contact information TruVision PTZ 36X Camera User Manual...
  • Page 73 Flush mount installation on a ceiling, 23  Backlight compensation  H  image quality, 43  Battery removal, 59  Home settings, 41  C  I  Cabling, 3  I/O box wiring, 17  recommended cable gauge, 4  Image flip, 49  Camera communication protocols  Image freeze, 47  set, 11  Installation environment, 5  Camera defaults  reset, 43  K  Camera site ID  display, 35  Keyboard  set, 14  navigate OSD menus, 33  Checklist  use, 33  menu settings, 61  KTD‐405 keyboard, 33  Communication protocols  protocols supported, 11  L  Cruise settings, 40  Language  change, 35  TruVision PTZ 36X Camera User Manual...
  • Page 74 T  OSD timeout, 49  Tilt limits, 49  Time/date  P  settings, 56  Pan/tilt  settings, 49  V  Passwords, 49  Video invert, 47  Power connector, 16  Preset points  W  settings, 37  Preset tour  WDR, 54  speed, 38  White balance settings, 46  steps, 38  Wide dynamic range, 54  Preset tour  Wiring camera, 19  dwell time, 38  Wiring the camera to the keypad, 17  settings, 38  Presets  Z  show, 37  Privacy mask settings, 55  Zoom speed, 47  Product overview, 1  TruVision PTZ 36X Camera User Manual...
  • Page 75  ...
  • Page 76  ...

Table of Contents