Specifications 7 Introduction This pocket guide provides basic information on setting up and using the UltraView IP PTZ 36X camera. Detailed information on the cameras can be found in the user manual. Before you begin Unpack everything. Check the items for damage, and verify that all items are included.
Adjust the height of the two housing tabs by turning the screw on which they are attached. The distance (h) of the tabs from the housing ring must be greater than the thickness of the ceiling. EN 2 UltraView IP PTZ 36X camera...
Page 5
Flush mount camera only: Install the trim ring. Align the trim ring to the housing, and insert the fix-pins to the holes. Then rotate the ring clockwise. 8. Connect the cables (see Figure 1). UltraView IP PTZ 36X camera 3 EN...
6 for the list of configuration parameters. The configuration pane displays the configuration tree with 10 configuration parameter folders. The configuration pane is always visible. Each folder has a list of subfolders that display the different configuration screens. UltraView IP PTZ 36X camera 5 EN...
Page 8
Alarm parameters Defines how the camera handles alarms such as input type, notification of alarms, and response schedules and duration. Motion Defines how the camera moves such as presets, shadow tours, and privacy masks.. EN 6 UltraView IP PTZ 36X camera...
Need help?
Do you have a question about the 36X and is the answer not in the manual?
Questions and answers