Flarm Warnings - LXNAV LX90 Series User Manual

Gps-navigation system with variometer
Hide thumbs Also See for LX90 Series:
Table of Contents

Advertisement

LX90xx/LX80xx Version 5.0
5.1.10.3

Flarm Warnings

Flarm warnings will be raised only when system is receiving FLARM data from internal or
external FLARM module. Using this dialogue the user can define which warnings will be
shown and how they are going to be shown. There are three types of warnings:
Traffic warnings will be raised once a new aircraft is detected by FLARM.
Obstacles warnings will be displayed when a collision with a ground obstacle is
predicted.
Low alarms, Medium and High alarms combo box defines alarm level at which
system will display collision warning.
On competition it is recommended to set to Medium or high alarms, otherwise too
much warnings will be displayed.
If the voice option is installed it is also possible to hear the horizontal and vertical situation
to the current object. Uncheck appropriate items if you want to disable this part of the
message. You can also define the way direction to the Flarm object will be presented.
There are three options:
Relative bearing: In this option direction will be given relative to the glider's nose
Traffic 3' o clock
direction (e.g.
True bearing: Direction is give with absolute direction (e.g.
Relative/True bearing is a combination of both methods. Relative bearings will be
given when flying straight and true bearings will be given when thermaling.
Graphical presentation. When this item is check, also a graphical presentation of
FLARM will be shown, when Flarm warning is displayed.
, which means traffic, is on your right side).
Page 63 of 166
June 2015
Traffic from 330°
)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lx80 series

Table of Contents