Canon iPF8400 Basic Manual page 12

Loading Rolls in the Printer
1
Press the Load button.
2
Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button.
•
Note
3
Open the Top Cover and lift the Ejection Guide.
4
Holding the Roll Holder so that the side with the
white gear faces the side of the Roll Holder Slot
with a white gear, load the Roll Holder shaft (a) into
the grooves (b) on both ends of the Roll Holder
Slot, fully into the slot.
12
Caution
If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select "Yes", and then press the OK button. Remove the paper and go to the next step.
•
Be careful not to drop the roll and hurt yourself when loading it.
•
Be careful not to pinch your fingers between the Roll Holder shaft (a) and the guide grooves (b) when loading
rolls.
iPF8400
Basic Guide