Canon iPF8400 Basic Manual page 14

Loading Rolls in the Printer
7
Holding the edge of the roll paper, lift the Release
Lever.
8
Hold the edge of the roll paper as you gently pull it
evenly with both hands to the position of the Ejec-
tion Guide (a). Align the right side of the roll paper
with the Paper Alignment Line (b), keeping this side
parallel to the line, and then lower the Release Lev-
er.
Important
•
Note
14
•
Do not omit steps 7 and 8. If paper cannot be advanced straight or if it wrinkles, it may jam or rub against the
Printhead.
•
Do not force the roll paper into alignment with the paper alignment line (b). This may prevent the paper from
being advanced straight.
You can adjust the strength of suction holding paper against the Platen when the Release Lever is released. If
it is difficult to load paper, press the ▲ or ▼ button on the Control Panel to adjust the strength. Set suction
stronger by pressing the ▲ button or weaker with the ▼ button. Three settings are available.
iPF8400
Basic Guide