Circuit Breaker Instructions - Respironics HomeLOX User Manual

Circuit Breaker Instructions

During normal operation, mains power is connected to the HomeLox
and the circuit breaker button is depressed.
If mains power is disconnected, the circuit breaker is activated and the
button is not depressed.
To reset the circuit breaker:
• Remove the power cord plug from the wall plug.
• Push the breaker button in until it locks and stays in.
• Plug the power cord plug back in to the wall outlet.
• HomeLox should operate normally.
• If the breaker activates again, do not reset the breaker. Remove
the power cord from the wall plug and call your equipment
provider for service.
12