Hardware Requirements; Cables - Lindy 2X8 Owner's Manual

English Manual

Hardware Requirements

Console
w
w
VGA Monitor for resolution up to 1920 x 1440 Pixel, up to 75 Hz
w
PS/2 compatible mouse
w
PS/2 compatible keyboard
Audio Stereo microphone and speaker, optional
PC
w
w
VGA graphics card
w 6 pin Mini DIN (PS/2) or 9 Way D (standard serial-port) mouse connection *
PS/2 keyboard port (6 pin Mini DIN) or AT keyboard port (5 pin DIN, 5V on Pin 5,
w
ground on pin 4)
Audio Stereo Input/Output for microphone and speaker, optional
* At a PC with a 9 Way D Type port, a PS/2 – serial adaptor (LINDY Art. No. 70058) has to
be used. The adaptor cable for the AT keyboard port is LINDY Art.No. 70139

Cables

Because of limited space on the rear side of the CPU switch and the many necessary connections to be
made, special system cables have to be used with this CPU Switch.
The first two consoles are connected via standard connection cables for SVGA, PS/2 and Audio Stereo
with 3.5mm Stereo connectors, but also LINDY KVM cables including SVGA and 2x PS/2 can be used
together with standard LINDY audio cables. To connect the consoles 3 and 4 of the CPU Switch
MultiMedia 4x8 special system cables have to be used.
Console to LINDY CPU Switch:
Length Art. No.
2m 33801
5m 33803
PC to LINDY CPU Switch: (uses special system cables)
Length Art. No.
1,5m 33811
3m 33812
5m 33813
Extension Cables:
A wide range of extension cables can be found from LINDY:
- Combo extension cables for KVM, 1m up to 10m
- Standard extension cables, available also for audio up to 10m
Description
Monitor/Mouse/Keyboard/Audio-Console-Cable (2x PS/2 + 1x VGA + 2x Audio)
Monitor/Mouse/Keyboard/Audio-Console-Cable (2x PS/2 + 1x VGA + 2x Audio)
Description
Monitor/Mouse/Keyboard/Audio-Cable (2x PS/2 + 1x VGA + 2x Audio)
Monitor/Mouse/Keyboard/Audio-Cable (2x PS/2 + 1x VGA + 2x Audio)
Monitor/Mouse/Keyboard/Audio-Cable (2x PS/2 + 1x VGA + 2x Audio)
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (DEC 2001)
3