Hardware Setup; Front View - Lindy 39401 User Manual

LINDY CPU IP Access Switch

2. Hardware Setup

2.1 Front View

1. Reset / Firmware Upgrade Switch
•
Pressing and holding this switch in while powering ON the CPU IP ACCESS SWITCH resets it to the
factory default firmware level
•
After the CPU IP ACCESS SWITCH has been powered ON, pressing and holding this switch in for more
that two seconds performs a system reset
Note: This switch is recessed and must be pushed with a thin object – such as the end of a paperclip, or a
ballpoint pen.
2. 10/100 Mbps Data LED
•
The LED lights GREEN to indicate 10 Mbps data transmission speed
•
The LED lights ORANGE to indicate 100 Mbps data transmission speed
3. Link LED
Flashes GREEN to indicate that a Client program is accessing the device.
4. Power LED
Lights when the CPU IP ACCESS SWITCH is powered up and ready to operate.
6
User Manual