Snmp - ZyXEL Communications UAG50 User Manual

UAG50 User's Guide

3-2-3-4 SNMP

The SNMP Agent Configuration screen enables you to access to your device via
Simple Network Management Protocol. If you are not familiar with SNMP, please
consult your Network Administrator or consult SNMP reference material. You must
first enable SNMP on the SNMP Agent Configuration screen.
Item Default
SNMP Disable
SNMP Port 161
Trap Port 162
Configuration
Community Name public/private
NMS Address ANY
Privileges Read/Write
Status Valid/Invalid
Figure 3-2-25 SNMP Setting Screen
Disables or enables the SNMP management.
If the SNMP enables, also allowed to specific the SNMP port number via
NAT. The allowed SNMP port numbers are 161(default), 16100-16199 and
Trap port numbers are 162 (default), 16200-16299. This Port setting is
useful for remote control via NAT network.
Every unit with SNMP enable must be configured to recognize one or more
community names up to 20 characters. The default setting for the
community of entry 1 is "public" and for the entry 2 is "private" and others
are empty.
The address of the NMS. The default settings for the NMS Networking are
"ANY".
Choose "Read", "Write", "Trap Recipients" and "All" for different privileges.
The default setting of the entry 2 is "write" and others are "read".
Chosen "Valid" or "Invalid". The default setting of entry 1, 2 are valid and
others are invalid.
60
Description