Installation; Connecting The Antennas; Installation Requirements - ZyXEL Communications UAG50 User Manual

UAG50 User's Guide
2-1

Connecting the Antennas

The UAG50 provides two antenna connectors on the rear of the unit.
2-2

Installation Requirements

Before installing the UAG50, make sure your network meets the following
requirements.
System Requirements
The UAG50 requires one of the following types of software:
Windows 98 Second Edition/NT/2000/XP/Vista

Red Hat Linux 7.3 or later version

MAC OS X 10.2.4 or later version

Any TCP/IP-enabled systems like Mac OS and UNIX (TCP/IP protocol

installed)
Standard phone line for xDSL modem Or Coaxial cable for Cable modem

Web Browser Software (IE 8.0 or later version, Chrome 14.0 or later version,

Firefox 14.0,15.0,16.0, or 17.0, Safari 4.0 or 5.0)
One computer with an installed 10Mbps, 100Mbps or 10/100Mbps Ethernet

card
UTP network Cable with a RJ-45 connection (Package contents)

Note: Prepare twisted-pair cables with RJ-45 plugs. Use Cat.5 cable for all
connections. Make sure each cable not exceed 328 feet (Approximately 100 meters).
ISP Requirements
Verify whether your ISP use fixed or dynamic IP. If it is a fixed IP, be sure to get the IP
from your ISP. For dynamic IP, which is mostly used, the PC will get the IP
automatically whenever it hooks up on the modem.

2. Installation

15