ZyXEL Communications UAG50 User Manual page 24

UAG50 User's Guide
Figure 3-1-8 Internet Connection Setting Screen—PPPoE Setting
Item Default
Username Empty
Password Empty
PPP MTU Setting 1492
TCP MSS Setting 1452
Service Name Empty
Connect on Demand and Max Idle Time
Connect on
Enable
Demand
10 Minutes
Max Idle Time
Keep alive and Redial Period
Keep alive Disable
30 Seconds
Redial Period
Enter the user name provided by your ISP. The user name can consist of up
to 80 alphanumeric characters and is case sensitive.
Enter the user password provided by your ISP. The password can consist of
up to 80 alphanumeric characters and is case sensitive.
MTU (Maximum Transfer Unit) specifies maximum transmission unit size.
MSS (Maximum Segment Size) specifies maximum segment size.
Enter the service name provided by your ISP. The service name can consist
of up to 64 alphanumeric characters and is case sensitive.
You can configure your UAG50 to cut your connection with your ISP after a
specified period of time (Max Idle Time). If you have been disconnected due
to inactivity, Connect on Demand enables your UAG50 to automatically
re-establish your connection as soon as you attempt to access the Internet
again. If you wish to activate Connect on Demand, click the radio button. If
you want your Internet connection to remain, click the radio button of keep
alive. The Max Idle Time maximum value is 65535 minutes.
This option keeps your PPPoE enabled Internet access connected
indefinitely, even when it sits idle. The Redial Period maximum value is 65535
seconds.
24
Description