ZyXEL Communications UAG50 User Manual page 25

UAG50 User's Guide
PPTP Client (Point-to-Point Tunneling Protocol)
If PPTP Setting is selected, then this screen will appear. Please enter the IP address,
Username and Password provided by your ISP.
Figure 3-1-9 Internet Connection Setting Screen—PPPoE Setting
Item Default
Username Empty
Password Empty
PPP MTU Setting 1492
TCP MSS Setting 1452
Service Name Empty
Connect on Demand and Max Idle Time
Connect on Demand Enable
Max Idle Time 10
Minutes
Keep alive and Redial Period
Enter the user name provided by your ISP. The user name can consist of up
to 80 alphanumeric characters and is case sensitive.
Enter the user password provided by your ISP. The password can consist of
up to 80 alphanumeric characters and is case sensitive.
MTU (Maximum Transfer Unit) specifies maximum transmission unit size.
MSS (Maximum Segment Size) specifies maximum segment size.
Enter the service name provided by your ISP. The service name can consist
of up to 64 alphanumeric characters and is case sensitive.
You can configure your UAG50 to cut your connection with your ISP after a
specified period of time (Max Idle
Time). If you have been disconnected due to inactivity, Connect on Demand
enables your UAG50 to automatically re-establish your connection as soon
as you attempt to access the Internet again. If you wish to activate Connect
on Demand, click the radio button. If you want your Internet connection to
remain, click the radio button of keep alive. The Max Idle Time maximum
value is 65535 minutes.
25
Description