ZyXEL Communications UAG50 User Manual page 89

UAG50 User's Guide
Item
General Settings
ESSID status
ESSID name
Broadcast
Security Settings
Security
Group Key Re-Keying
Use WPA or WPA2 with
Pre-shared Key
Pre-Shared Key
Use WPA or WPA2 with 802.1x
Default
Figure 3-2-51 ESSID Setting Screen
Active (ESSID1) ESSID1 is active, and others are inactive by default.
The ESSID's name by default is "ZyXEL01". It is case sensitive and must not
exceed 32 characters.
Enable This allows you to show or hide the ESSID name
when users search the Wi-Fi signal.
Open Select Open to allow wireless station to communicate
with the device without any data encryption. Select
WPA / WPA2 / MixMode for data encryption.
86400 Seconds Enter a number in the field to set the force re-keying
interval.
Disable
Empty Enter a pre-shared key from 8 to 63 case sensitive
ASCII characters.
Disable
89
Description